Control Transformers are to supply power to control and / or auxiliary equipment not intended for direct connection to the main source. Control Transformers are specifically used to provide control supply voltage for the control circuits of AC motor starters, i.e. Starter coils, timers, indicating lamps electronics protection relays etc. Control Transformers for contractor applications have to Energize the coil and Maintain a contact for definite period of time. The initial energizing of the coil takes 5 to 40 mil. seconds and requires 3 to 10 times the normal current. While calculating the VA rating of the Control transformer, this factor should be taken in to account. They are available for single phase and three phase inputs and are in the range from 15 VA to 30 KVA .
Control Transformers are two winding transformers with both winding made of copper.Hindustan Stabilizers are made of using high quality materials. Electrolytic grade super enameled wire with best insulation’s are used. Core material are CRGO EI or Strip cores. Experienced hands with best machines for winding ensures best results with minimum size. Appropriate class of insulation materials are used. Transformers are impregnated in insulating varnish for long lasting performance. Input and out are terminated on Bakelite board with proper size of terminals.
Application Specific Transformers:
We make transformers as per specific requirements and some of
standard applications are
* Auto Transformers for auto transformer starter,
* High voltage transformers,
* High current transformers for load testing,
* Potential Transformers for metering and
*Short Circuit-proof transformers,
*Pulse transformers for power electronics